Nádrž

Growing pot

A unique growing pot You can build any cultivation system yourself from the growing container. The number of containers above is limited only by the displacement of the pump.

Growing pot cover - 50mm hole

It is always placed in the row that is above the system.According to where the water inlet is loacted, they are distinguished to the left and the right.

Growing pot cover - 6mm hole

It is always placed in the row that is above the system.According to where the water inlet is loacted, they are distinguished to the left and the right.

GROWING POT COVER straight - 50mm hole

Víko rovné pro horizontální použití.Lze také použít pro verticální pěstování salátů.Možnost vkládat košíčky o průměru 4,6.

GROWING POT COVER straight - 6mm hole

Holder large 2pcs

The large holder is designed to hold the large growing container firmly onto the aluminum frame 20 x 20mm.

Growing bed

Designed for 4D VERTICAL system.Bevelled, diameter 50mm. Helps to hold the plant securely in the middle of the hole.

Dowel pin

10 pcs of dowel pin with M6 nut

Sleeve with adjustable foot - 2 pieces

The sleeve is used to balance inequalities and system settings into the balance.

Sleeve with fingerboard-2pcs.

Sleeve with the tab is used  the door profile fits.

Sieve

The sieve is inserted into the waste in the growing container so that it does not fall into the waste when germinating the seeds.

Connecting tube

The pipe connects the growing containers between the floors.

Pump HX 8820

Pump for 5SM / 4SM / 3SM systems

Pump HX 8815

Pump for 1SM

Hose 16x2

Pipe 16x2

T piece

T-connector for hose 16x2 mm

Knee

Elbow 90 degree for hose 16x2 mm 

End cap

nozzle

Hose 6mm

Knee

Water tank small

Water tank big

aluminium 20x20x2mm 1m

Angular connector 108° for profile 20x20x2

Iron angle wrapped in plastic.

Growing bed

Designed for 4D VERTICAL system. Straight, diameter 50mm. Helps to hold the plant securely in the middle of the hole.